How to Replace a Nissan Juke Spare Key
Nissan Juke is a fun and stylish hatchback, with an unusual engine setup. It's noisy, but it's still a lot of fun to drive.
The key fob battery in the Nissan Juke must be replaced every two years or at the latest, or if it's low. You can do it yourself, but you'll need a few tools.
Dead Coin Battery
If your Nissan Juke key fob has stopped working the first thing you should be sure of is the battery within it. It may be dead and need to be replaced. This is a simple fix that only takes some minutes. You can do this by flipping the fob and opening the tiny latch/release at the back. Remove the battery from the old one and then pop in the new one, ensuring sure that it's facing downwards in the fob. Line between the two halves of the fob with care.
If the fob was exposed to water, it will need to be cleaned prior putting the new battery in. It is possible to clean the fob by using isopropyl electronic cleaner, and paper towels. Then, allow it to dry completely prior to reinstalling the battery.
The key fob needs to be connected with the vehicle in order to start it, which can be accomplished by following the instructions in the owner's manual, or using an OBDII scanner. If the key fob hasn't been connected, this is the most likely cause of the reason it stopped working. A faulty chip in the fob could cause it to stop working however this is extremely rare. A new receiver module could be needed in this case. If this is the scenario, the module will need to be replaced by an accredited technician.
Water Damage
The key fobs run on batteries and the batteries must be replaced every two years or at the point that the car ceases to respond when you press the "start" switch. The keys' rubber seals are designed to keep out water, however submerging a key fob in the pool or ocean can cause damage to the electronic chip. If this is the case then you'll need an alternative key from Nissan or locksmith.
It's possible that the computer lost connection to the key fob, which could be caused by a variety of factors. A simple restart of the vehicle could fix the issue, however if the key is still displaying the "Key ID" error message, you'll have to contact Nissan or an auto locksmith for help.
Three common causes are a dead battery on the key fob or a key that's not programmed, or damaged key fob. The first two are fairly easy to resolve, and the third one is more difficult to identify and repair on the spot, however it can usually be fixed with a bit of perseverance. WhoCanFixMyCar allows you to compare Nissan Key Replacement prices in your local area and schedule your repair. It only takes two minutes and you can read reviews from local garages, Nissan car mechanics and dealerships before deciding.
Faulty Chip
The key fob in your Nissan Juke has a special chip that transmits a signal to the car every time you turn it. If the chip is defective, it can cause the key to stop functioning. If this happens, the problem is only solved by replacing the key. There are a variety of reasons your Nissan Juke's key might be defective, such as water damage or a dead coin battery or a malfunctioning receiver module.
If your key fob stops working after an immersion in the wash or even a bath, it is important to examine the chip for water damage. Verify that the metal retaining clips on the chip are in good condition. Also, ensure that the chip isn't in contact with water. If you notice any signs of water damage to the electronic component, you should remove the battery and wipe it down with isopropyl ethanol or electronic cleaner.
If the chip is not working If the chip is defective, you must visit your local locksmith or dealership. To find a replacement, they will need the year, model and year of your vehicle. It is also necessary to write down the VIN (Vehicle Identification Number) to ensure that the locksmith or dealer is aware of the exact key you own. This will enable them to find the correct key code, and also ensure that they are cutting the right one.
Faulty Receiver Module
The key fob transmits the radio frequency signal to your car that performs various functions. It can open your trunk while you rush to get groceries or start your vehicle by pressing a button on the fob. It can even open your windows and switch on the horn in case you have a mishap and lock your keys inside the car.
If the key fob ceases functioning, it could be a problem with the receiver unit in the vehicle. nissan replacement key fob are tuned to detect specific frequencies that correspond with the signals sent by the Nissan key fob. If your car is equipped with an inoperable receiver module it will not respond to any signal coming from the key fob.
Whatever the way your Nissan key fob ends up getting damaged, it is always beneficial to have a spare in case the key becomes damaged or lost. A locksmith or dealership can program an additional key to work with your Nissan. This will allow you to avoid the hassle of losing your keys or locking them inside your car.
If your Nissan Juke key fob has been exposed to clean tap water or rain the issue can be solved by cleaning it with isopropyl ethanol or electronic cleaner. If, however, the chip has deteriorated then you'll need purchase a new key fob that can be assigned to your vehicle through a locksmith or dealer.